PLC BASED AUTOMATIC BOTTLE FILLING CONTROL SYSTEM
PLC Based Bottle Filling System is a small home based filling machine. Prior to this Project, there were many problems faced in the home based filling plant. The main problem was that the filling plant filled only same size of bottles. for example for filling 250 ml bottle, a conveyor system is required while for filling 500 ml bottles, another separate conveyor system is required which greatly increases the cost of filling plant.
So we design this project to fill
bottles according to our instructions.
The main purpose of the project
is to fill the bottles by changing filling time in the coding of PLC according
to our instructions.
Firstly put a bottle on conveyor
system which is in moving condition, after sometime when bottle reach at bottle
filling sensor, it gives signal to PLC and conveyor stops after few seconds and
PLC give signal to wiper motor pump. In this way water motor pump start filling.
Bottle filling plant contains 2
water tanks, one for backup and one for real time filling purpose. The level of
the liquid in the tank which is used for real time filling purpose is kept
constant so that the required time of filling of bottle remains constant every time.
After filling the bottle it moves further on the conveyor belt and bottle stops
in front of the second sensor where
We pick the bottle manually and
after picking conveyor belt starts again.
About the Author
I am Kashif Mirza, the founder of Student Training Lab (STL). I am working on projects since 2005 before that I just search things and now I am sharing my knowledge through this plateform.
| Follow @theenggprojects |
 In 61 people's circles
|
 |
 |
 |
 |
Subscribe To Get FREE Tutorials!
|
Respected Readers:
|
0 comments:
Your feedback is always appreciated. I will try to reply to your queries as soon as time allows.
Post a CommentNote:-
Please do not spam Spam comments will be deleted immediately upon my review.
Regards,
Kashif Mirza